How a Wet Tile Saw WorksThe wet tile saw is equipped with a diamond-edged carbide blade. This is not like the blade with teeth that you use to cut wood.
I like to use a more common tool--an angle grinder--as a comparison. Angle grinders can be fitted with thick carbide circular blades which cut materials more by relentlessly grinding them down, rather than by cutting with a sharp blade.
A tile saw employs a similar way of cutting tile. Sharp, "toothed" metal blades would wear down quickly and have little impact on tile. But the grinding action of the wet tile saw makes quick work of tile.
Add in the wet tile saw's continually recirculating "fountain" of water to keep the blade and materials cool and to reduce the dust and flying particles.
The Downside of a Snap Tile CutterYou can cut tiles as large as 12" using a snap tile cutter or rail cutter. But the breaks with snap cutters can be uneven and wildly unpredictable (meaning: a lot of broken tile sent to the land fill). A wet tile saw is the professional solution.
2 Reasons for the "Wet" Part of Wet Tile Saw
- The Cooling Effect - Without water spraying on the tile, it would get too hot and break. The water is a coolant and a lubricant.
- Keeping Particles at Bay - Wet tile saws kick up a lot of debris. Water helps minimize the mess.
Types of Wet Tile Saws
- Recirculating Pump - These wet tile saws keep recirculating and filtering the same water. This eliminates the need to be hooked up to a water faucet.
- Fresh Water Source - These saws draw straight from a water source. They are often touted as "Pumpless," as if pumps are a bad thing. While these "pumpless" tile saws ensure a continual spray of clean water, they also mean you cannot stray too far from a water source.