Home Improvement Interior Remodel Walls & Ceilings Drywall

How Long Does Drywall Mud Take to Dry?

Plus, tips for speeding up drywall mud dry time

Anyone who has installed and applied drywall joint compound intimately knows the concept of working time vs. total time. Applying the joint compound to the drywall often can be accomplished quickly. A skilled drywall worker can finish a wall in minutes: working time.

Joint compound drying on blue dry wall

The Spruce / Margot Cavin

But total time is another matter. Waiting for the drywall joint compound to fully dry before other layers of mud or paint are applied can take many hours. If the conditions are poor, it can take days. How long does drywall mud take to dry—and is there any way to speed up the drying process?

Drywall Mud

Drywall mud is the pejorative and most commonly used term for drywall joint compound, a fortified gypsum-based material used to fill between sheets of drywall and for applying and covering over drywall tape.

How Long It Takes Drywall Mud to Dry

Drywall mud can take as long as 24 hours to dry for thick applications. The 24-hour drying time recommendation can be applied to nearly all factors. Some manufacturers will bring down that number to 12 hours if a few shortcuts are applied to help speed up drying time without affecting the finished product.

Filled-in screw holes and minor indentations can take about 2 hours to dry. Though small, screw holes—especially failed screw holes lacking screws—are deep and can take a long time to cure from top to bottom.

Skim coats dry quickly. Any skim coat or the outer edges of feather coats will dry within 15 to 20 minutes.

Properly installing drywall requires not just effort but also plenty of time, particularly when it comes to drying time for each coat of drywall mud. For a better paint job, avoid pushing drywall mud times. Instead, let the drywall mud completely cure.

Drywall joint compound manufacturers are hesitant about providing targeted drying times, preferring instead to provide a wide spectrum and then leave the rest up to the user. The reason is that so many factors are at play: room temperature, product temperature, application thickness, type of application, humidity, and type of reinforcing tape or bead.

How Long It Takes for Drywall Mud to Dry

  • As much as 24 hours
  • Can be as little as 12 hours for seams
  • Or as little as an hour or two for filled-in screw holes
  • Skim coats can dry within 15 to 20 minutes
  • Temperature and humidity are key dry time factors

How to Speed Drywall Mud Drying Time

Apply Thinner Coats

Just like when you're painting, applying thinner coats of drywall mud means it takes less time for each layer to dry. This is the single best way to decrease drywall dry time.

The first coat that you apply will take the longest, as it needs to be the thickest to fill the joints between the drywall sheets and cover the screw holes. Once the initial coat is done, you can thin out the remaining coats quite a bit. Not only does this cut the drying time, but it also reduces the likelihood of indentations and future cracking.

Improve Your Drywall Hanging Skills

Poorly hung drywall requires more drywall mud to fix hanging problems. Excessively wide seams between boards, large gaps around light switches or outlets, poorly taped corners—all are drywall hanging issues that some do-it-yourselfers face.

Hanging well-spaced boards, applying tape well, and creating properly sized cut-outs are essential skills that help you avoid over-mudding the drywall.

Raise Room Temperature

While you cannot change exterior temperatures, you can turn up the heat in a room that is being drywalled. To quicken drywall dry time, turn on the furnace or put space heaters in the room. Remember that the humidity needs to escape, so open windows and doors.

For a small patch of wall, aim a hairdryer at the area. Keep the hairdryer far away from the patch. To prevent fires, avoid using a heating gun.

Dehumidify the Air

Set up a dehumidifier to suck the moisture out of the room's air. Drywall mud is laden with water, so a dehumidifier will accelerate the process of moving water away from the wall system. Be sure to frequently check the dehumidifier's water pan and dispose of the contents.

If it's raining outside, close the windows. Outside humidity may exceed indoor humidity created by evaporating drywall mud.

Increase Air Circulation

The length of time it takes for mud to dry decreases when air is moving around the room rather than staying still. If it is not overly humid outside, open up the windows to circulate the air. However, if it is humid, avoid letting that humidity in, as it can actually slow the drying time. Set up fans in the room to get the air moving, whether or not you are able to open the windows.

Use Hot Mud

For time-sensitive projects, you can use a special type of compound known as hot mud.

Hot mud is a powder that you mix with water. It is formulated to set like plaster, so it dries in just 20 to 60 minutes. You can choose from products that have a faster or slower drying time. One downside is that the rapid dry time does not allow much time to fix errors. Be sure to follow the manufacturer's instructions for specific products.

The first time you use hot mud, apply it to only small areas to get used to how it works. If you need to mud a larger area, stick to standard compound until you feel that your skill level is up to par.

When using hot mud, mix only enough to fill the mud pan once. If you mix too much, you risk the mud drying before you use it all. In the same vein, wash your tools immediately after mudding, not only to avoid it drying on the tool but also because residual compound left in the pan can make the next batch set too fast.